A un vistazo
VXLAN/NVGRE Hardware Offloads: These stateless offloads preserve application performance for overlay networks. With these offloads, it is possible to distribute network traffic across CPU cores. At the same time, X710 offloads LSO, GSO, and checksum from the host software, which reduces CPU overhead
Mobile and cloud application acceleration: Intel’s Data Plan Development Kit (DPDK) delivers an open driver where users can fine-tune small packet performance, which delivers line-rate at 128 byte, and near line-rate at 64 byte
Low latency: Intel Ethernet Flow Director delivers hardware-based application steering and Intel Data Direct I/O makes the processor cache the primary destination and source of I/O data rather than main memory. Combined, latency is reduced and Intel reports a three-fold improvement in RPS
Virtualization performance: With Intel Virtualization Technology (VT), the X710 family of adapters delivers outstanding I/O performance in virtualized server environments. These adapters reduce I/O bottlenecks by providing intelligent offloads for networking traffic per virtual machine (VM), which enables near-line rate speeds for small packets and supports almost an unlimited amount of isolated traffic flows so that you can scale your cloud environment
Next-generation VMDq: The X710 adapters support up to 256 VMDq VMs and offer enhanced Quality of Service (QoS) feature by providing weighted round-robin servicing for the Tx data. The adapters offload the data-sorting functionality from the hypervisor to the network silicon, which improves data throughput and CPU usage
PCI-SIG SR-IOV implementation: Provides an implementation of the PCI-SIG standard for I/O Virtualization. The physical configuration of each port is divided into multiple virtual ports. Each virtual port is assigned to an individual VM directly by bypassing the virtual switch in the Hypervisor, which results in near-native performance
VM load balancing: Provides traffic load balancing (Tx and Rx) across VMs that are bound to the team interface. It also provides fault tolerance if a switch, port, cable, or adapter fails
Detalles del producto
Preguntas y respuestas sobre este producto
Aún no hay preguntas acerca de este producto
Resuelve tus dudas preguntando a la comunidad y a nuestro equipo de servicio al cliente.
Resuelve tus dudas preguntando a la comunidad y a nuestro equipo de servicio al cliente.
Especificaciones
| Puertos e Interfaces | |
|---|---|
| Tecnología de conectividad | Alámbrico |
| Ethernet LAN (RJ-45) cantidad de puertos | 2 |
| Conector fibra óptica | SFP+ |
| Interfaz de host | PCI-E |
| Interno |
|
| Interfaz | Fibra |
| Peso y dimensiones | |
|---|---|
| Altura | 69 mm |
| Profundidad | 167 mm |
| Ancho | 15 mm |
| Detalles técnicos | |
|---|---|
| Cantidad | 1 |
| Diseño | |
|---|---|
| Componente para | servidor |
| Color del producto | Negro, Verde |
| Conexión | |
|---|---|
| Estándares de red | IEEE 802.1Q,IEEE 802.1ad,IEEE 802.1as,IEEE 802.1p,IEEE 802.3ae,IEEE 802.3x |
| Etiquetado VLAN |
|
| Soporte iSCSI |
|
| Jumbo Frames, soporte |
|
| Tramas Jumbo | 9728 |
| Soporte de control de flujo |
|
Mostrar más
¿Ves alguna información equivocada? Repórtala aquí
Acerca del Fabricante
Regresar arriba ▲
100% Productos nuevos 
