La licencia es aplicable a los siguientes productos:
A un vistazo
8-amp full load output, with 3 amps maximum/circuit, in NAC expander mode (UL 864)
6-amp continuous output in stand-alone mode (UL 1481)
Built-in Strobe Synchronization with System Sensor, Wheelock, or Gentex appliances for ADA Compliance
Strobe signal "passes through" allowing syncing of large systems
Instantaneous switchover to standby battery (if equipped) when AC fails, maintaining power to all attached devices without intervention
LED lights for quick and easy diagnosis, troubleshooting, and status indication
Two outputs can be used for constant power devices such as door holders (power drops upon alarm)
Contains two fully-isolated input/control circuits for added flexibility
Fully regulated and filtered power output - optimal for powering four-wire smoke detectors, annunciators, and other system peripherals requiring regulated/filtered power
Fully supervised power supply, battery, and NACs for added reliability
Detalles del producto
Preguntas y respuestas sobre este producto
Resuelve tus dudas preguntando a la comunidad y a nuestro equipo de servicio al cliente.
Especificaciones
Peso y dimensiones | |
---|---|
Altura | 381 mm |
Profundidad | 69,8 mm |
Ancho | 368,3 mm |
Control de energía | |
---|---|
Frecuencia de entrada | 60 Hz |
Voltaje de entrada | 120 V |
DC nominal de los contactos | 5 A at 24 VDC |
Corriente de entrada | 3.2 A |
Trigger current | 2 mA |
Trigger voltage | 9 - 32 V |
Auxiliary current | 500 mA |
Desempeño | |
---|---|
Certificación | UL, ULC, CSFM, MEA |
Características | |
---|---|
Tipo de producto | Sistema de alimentación |
Battery charging capability | |
Cantidad por paquete | 1 pieza(s) |