Este producto es compatible con:
La licencia es aplicable a los siguientes productos:
A un vistazo
JEDEC standard 1.5V Power Supply
VDDQ = 1.5V
800MHz fCK for 1600Mb/sec/pin
8 independent internal bank
Programmable CAS Latency: 11, 10, 9, 8, 7, 6
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
On Die Termination using ODT pin
Average Refresh Period 7.8us at lower than TCASE 85°C 3.9us at 85°C < TCASE < 95°C
Asynchronous Reset
Height 1.338” (34mm) w/heatsink
Detalles del producto
Preguntas y respuestas sobre este producto
Resuelve tus dudas preguntando a la comunidad y a nuestro equipo de servicio al cliente.
Especificaciones
| Peso y dimensiones | |
|---|---|
| Altura | 34 mm |
| Profundidad | 7.1 mm |
| Ancho | 133.3 mm |
| Memoria | |
|---|---|
| Intel® Extreme Memory Profile (XMP) | No disponible |
| Latencia CAS | CL10 |
| Diseño de memoria (módulos x tamaño) | 2 x 8GB |
| Componente para | PC/servidor |
| Voltaje de memoria | 1.5 V |
| Configuración de módulos | 1024M x 64 |
| Tiempo activo en fila | 37.5 ns |
| Buffered memory type | Unregistered (unbuffered) |
| Tipo de memoria interna | DDR3 |
| Capacidad de memoria RAM | 16GB |
| Velocidad de memoria del reloj | 1866MHz |
| Canales de memoria | Dual-channel |
| ECC |
|
| Tiempo de actualización de ciclo de fila | 260 ns |
| Requisitos del sistema | |
|---|---|
| Sistema operativo Linux soportado |
|
| Sistema operativo Windows soportado |
|
| Otras características | |
|---|---|
| Factor de forma | 240-pin DIMM |
| Diseño | |
|---|---|
| Retroiluminación |
|
| JEDEC standard |
|
| Color del producto | Negro |
| Tipo de enfriamiento | Disipador térmico |
100% Productos nuevos